Đang chuẩn bị liên kết để tải về tài liệu:
báo cáo khoa học: " Gait analysis methods in rehabilitation"

Tuyển tập báo cáo các nghiên cứu khoa học quốc tế ngành y học dành cho các bạn tham khảo đề tài: Gait analysis methods in rehabilitation | Journal of NeuroEngineering and Rehabilitation Review Gait analysis methods in rehabilitation Richard Baker 1 2 3 4 BioMed Central Open Access Address 1Hugh Williamson Gait Analysis Service Royal Children s Hospital Parkville Victoria Australia 2Gait CCRE Murdoch Children s Research Institute Parkville Victoria Australia 3Department of Mechanical and Manufacturing Engineering University of Melbourne Parkville Australia and 4Musculoskeletal Research Centre La Trobe University Bundoora Victoria Australia Email Richard Baker - richard.baker@rch.org.au Corresponding author Published 02 March 2006 Received 29 April 2005 Journal of NeuroEngineering and Rehabilitation2006 3 4 doi 10.1186 1743-0003-3-4 This article is available from http www.jneuroengrehab.com content 3 1 4 Accepted 02 March 2006 2006Baker licensee BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License http creativecommons.Org licenses by 2.0 which permits unrestricted use distribution and reproduction in any medium provided the original work is properly cited. Abstract Introduction Brand s four reasons for clinical tests and his analysis of the characteristics of valid biomechanical tests for use in orthopaedics are taken as a basis for determining what methodologies are required for gait analysis in a clinical rehabilitation context. Measurement methods in clinical gait analysis The state of the art of optical systems capable of measuring the positions of retro-reflective markers placed on the skin is sufficiently advanced that they are probably no longer a significant source of error in clinical gait analysis. Determining the anthropometry of the subject and compensating for soft tissue movement in relation to the under-lying bones are now the principal problems. Techniques for using functional tests to determine joint centres and axes of rotation are starting to be used successfully. Probably the last great challenge for optical .